Reduction Multi-Color Linocut Tips and Tricks

 
This post compiles several months worth of learning while doing multiple color linocuts.
These are the things I've screwed up and learned from.

Before I begin I'll start with a few points on how I work-

1. I work very opaquely. I can try and answer questions about transparency, but they'd be just educated guesses, not tips from real life experience.

2. I only print with oil based litho color inks. This means modifiers are in order. Modifiers and I have become close friends.


THE BASICS

• Print with a hard or semi-hard roller. Soft rollers tend to fill in delicate lines. In reduction linocuts you want the ink to sit on top of the block and hard rollers do the trick nicely.
• Rolling quickly picks up ink. Rolling slowly deposits it. On your ink slab you want to roll fast to lift the ink, and on the block you want to roll slow to lay it down. 
• It's sometimes helpful to mix ink the day before you print just to get a feel for its consistency. Mixing an ink loosens it a great deal, and by the time you're ready to print you may find it's hardened or changed quite a bit. 
• Add modifiers just before you print. Modifiers and time generally don't mix well. Especially cobalt drier...It's fine to mix up your color earlier, but save the additives for later. 
• When mixing ink and testing the consistency, test with a small 1/2 inch or 1 inch roller. This way you'll be able to see how the ink rolls out without having a big mess to clean up, and you can save your larger roller for good prints. 
• Blocks can be cleaned with just mineral spirits or vegetable oil and a clean rag. Remember to degrease the block before you print again though, either with denatured alcohol or a household cleaner like Simple Green, especially if using vegetable oil, which tends to be very greasy.
• Give yourself plenty of time! The one time you find you need to print an edition in an hour is the one time -everything- will go wrong.

THE INTERMEDIATE

• Printing on a paper with texture is, in most cases, not the best idea. In fact, I generally stretch my paper on a litho press before I begin (placing the paper on a large block and running it through the litho press, which stretches and smooths the paper). This way if there's a great deal of pressure when printing the block the paper doesn't stretch in the process and cause the registration to be off. Stretching ensures for spot-on registration.
• When cutting and registering paper include about 3-4 newsprint pieces that are also registered. This way before printing the edition on good paper, the newsprint paper can act as a test to see how the colors interact with one another, and how the ink sits on top of the previous layer. This way too, there isn't risk of ruining a good pull from the edition.

THE ADVANCED

• To ensure a nice even coat, roll slowly over the block until it looks as though there is a great deal of ink on the block. Roll out the excess ink on the roller on a clean part of your slab and roll quickly a few times over the block (from different directions) to lift off a little of the excess and unify the coat. Modifiers will come into play with this too, see below (Miracle Gel Reducer in particular) for more...
• FAT OVER LEAN....or...GREASY OVER NOT SO GREASY...or...INK WITH STUFF IN IT ON TOP OF INK WITHOUT AS MUCH STUFF IN IT. This is the, the, -the- main thing to know when printing a multi-color linocut. If you find your ink is not sitting over your last layer of ink this is probably the problem. You never want to start out with a really greasy first layer because subsequent layers are going to need even more grease to sit on top. When beginning a reduction linocut I generally don't modify the ink very much- a little magnesium carbonate and cobalt drier are enough. The next layer I'll add a little bit of grease, and a little more to the next, and so on and so forth, but this will be covered more in the modifiers. If you find your ink isn't sitting on top of your previous layer try adding a little grease to it (such as linseed oil).

THE MODIFIERS (not all of them, but the most important for this process)

• Linseed Oil- The main component in oil based ink. Ink is generally just linseed oil and pigment (with a few little things added in). That's it. If you want to loosen up an ink, add some more linseed oil. Add in small doses.
• Magnesium Carbonate- A white powdery substance that can be added up to 100%. Doesn't alter the color of the ink. Stiffens (or "shortens") ink, adds body, and decreases greasiness. Reduces tack.
• Setswell- Loosens oil based ink, creates transparency and reduces shine. Thins and softens ink that are too stiff and seem "dry" when printed.
• Cobalt Drier- The best friend of anyone who needs to print a color a day. Although it's recommended to only add a tiny drop of this powerful drying agent, you can sometimes get away with adding more. I've been known to add a great deal (20-30% in a bind) BUT you need to be ready to print -FAST- because the ink will literally dry on the slab. If adding a great deal only roll out enough ink to cover your roller. In a pile, the ink seems to dry slower, so just take it as you need it. Also, if you add cobalt drier and keep the ink to print again later it -will- work, it just needs to be used within a day or two, and generally loosened up a bit because it will probably have begun to harden somewhat. 
• Dullit- Print too shiny? Hate shiny? Want to murder shiny as it blinds you in the face as you try to photograph your print after it's finished? It's all just personal preference of course, but personally I'm not a fan of shiny prints, give me matte any day. So the solution? Why, Dullit! Add about 10-15% to ink to decrease shininess. Just make sure not to add too much or it'll mix up like concrete. 
• Miracle Gel Reducer- I've saved the best for last. This little gem is basically the answer to everything. I'm voting for MGR next presidential campaign... Almost any relief printing problem can be cured with a small dose of miracle gel reducer. It reduces body and tack of oil based inks, without increasing greasiness. It makes relief inks release onto paper easier and reduces roller and lap marks on large flat areas of color. Its ability to cure cancer has not yet been proven, but I'm pretty sure it could probably do that too. Side note- there is a counterpart to MGR called "Gelled Medium" but for me it...just isn't the same.
• Miracle Gel Reducer and Magnesium Carbonate- The dream team. The right amount of the two of these almost always ensures for near perfect consistency. Generally I add magnesium carbonate to give a little more body to the ink (the amount depending on the consistency of the ink to begin with- stiff inks get just a dash, and loose inks get quite a bit), then a bit of miracle gel reducer to decrease the tack. When mixing the ink I generally look to see if the palette knife picks up all the ink on the slab, without leaving a residue. With any of these modifiers it's going to take some practice to know what the "right" consistency looks and feels like, but starting with these two little gems is probably a good place to learn. 

Both the school and the museum I work at order most of its modifiers from either Daniel Smith or Graphic Chemical. In fact, everything except the MGR can be found at Graphic Chemical. They're particular amazing for their discussion board. Because it's a small company they are -extremely- helpful and personable. -ANY- question you have about -ANY- of their products is generally answered within a day or two, usually by the owner of the company. Overall just an amazing company.

THE MISCELLANEOUS

• Rainbow Roll (or Gradients)- Rainbow rolls are a way of putting multiple colors down in a single pass. Lighter or darker variants of a single color can also be used to make a gradient. The ink it mixed up and put down on the slab one right next to another so that all the colors form a single (or near single, little gaps are okay) line of ink. The roller is then passed over this line of ink, and mixes on the roller. For example, if white is laid down next to a dark blue, the roller passes over the two and a line forms between the two of a new color- a light blue. The roller then passes over the block to create a gradient when printed.

If the task of printing look overwhelming, just remember- you've only got three things that can really be screwed up: the paper, the press, or the ink. It's got to be one of the three, so don't get discouraged!

Thanks for reading this far! I hope some of these were helpful and not a complete waste of time. If you have any other questions about the process or problems with printing feel free to comment and I'll try and help if I can. Check back soon for progress on my next multi-color linocut.

Why Hello multi-colored linocut- We meet again. (part I)

So earlier this year I took it upon myself to try my hand at linoleum cuts again. I had done one previously for my intro to printmaking course and thoroughly enjoyed it- it was six colors. The one I completed just recently was 36. That's right, 36. It's the toy phone seen on the header to this blog- and also on my website here. I fell in love with the process all over again and, as masochistic as it may seem, wanted to do even more. So early this month I started another one.

The first was an old Fisher Price toy phone I found at a thrift store, and I decided to continue with this theme. I like the idea that something a child had such love and devotion for eventually ends up for sale in a junk store, all love forgotten. This love and abandonment is reflected in the block itself. Such devotion goes into making these multi-colored linocuts, but because of the nature of the process all I end up with (besides some hopefully beautiful prints) is a carved away, useless piece of linoleum, which just gets thrown away. So off to the junk store I went!

What I ended up finding was a beat up, old as sin wooden toy dog. I took some photos, transferred it to my block and began cutting away. When I transfer my image I usually just rub it up with red conte and draw in the lines after with a ballpoint pen. I like using the pen because it doesn't rub off during printing and stays put even after cleaning the plate with mineral spirits. The first image here shows the pen on the block along with a few cut marks where the white of the paper will show through. I always draw in with pen where I'm going to cut just so I don't mess everything up. :)

My first step (after stretching my paper) was to print a light blue for the flecks of paint still clinging to the toy. I'm trying something a little different in that I'm creating a mask for most of my first few colors, just so I don't build up a great deal of grease in the ink that's getting layered. At the time I'm writing this I've found this to be a mistake- the first layer or two should probably be put down over the entire block, just to create a base. I'm afraid I forgot to get any pictures after the first color was printed, but it went down without any hitches, and I kept a lot of the grease out of my ink.

On to color two!
So after the lightest blue was printed again I took my block and marked in with ballpoint pen where to cut out (image 2). Again I created a mask for the blue (which only covered a small section of my block) and printed again. I'm afraid this one had a bit too much grease in it which is repelling some of my later colors. Live and learn though, right? Here's an image of the mask with the second color along with a print showing colors one and two.

I usually make my masks out of contact paper, but find it sometimes peels up with the tackiness of the ink, so I end up having to tape it down in spots. This isn't the brightest thing to do either though, since the tape raises up the roller enough that it becomes difficult to cover it evenly, so I'd recommend taping over areas far enough from where the roller will be hitting!

Anyway, I'm still pretty excited about this project, and following this one would still like to do one more multi-colored lino to create a series of three. There's about six colors on this one now (I'm new to this blogging thing, so I'm not in the habit of taking pictures after every color ;) ) and I'm not even going to count how many there will be but I'll be sure to keep posting my progress over the next few weeks. Check back to see it, hopefully it'll be great when it's finished!